Xiamen Ji Yuan Stone Co.,Ltd.
Granite Kerbs
Granite Kerbs
These professionally crafted Granite Kerbs are the perfect addition to any landscape project. Made from durable granite, these kerbs provide long-lasting strength and beauty to any outdoor space. With a professional and objective tone, rely on the expertise and quality of these kerbs to enhance your project.
Feature | Details |
---|---|
Meshed pavings |
1.3X30X2,30X30X3 2.50X50X2,50X50X3,50X50X5 3.100X50X2CM.100X50X3CM 4.74X46X2,74X46X3,74X5CM ( Fan shape) |
Basalt tile |
|
Palisade |
|
Basalt curb/Skirting stone |
|
Basalt curb stone (Blockstufe) |
|
Basalt notch stone | 24x10x3cm |
Basalt cube |
|
Basalt cube tumbled | 10x10x8cm |
Basalt cube | 9x9x9cm |
Brick-Stone (Mauerstein) Granite |
|
Paving Bluestone |
|
Drywall stone brick stone |
|
Round paving |
|
Palisade |
|
Brick Stone (Mauerstein) Granit-Gneis |
|
Wall-Cover Tile Granit-Gneis | 50x30x3cm 100x30x3cm |
Paving Travertine | 60x40x3cm |
Travertine "Roman Pattern" | 20.3x20.3cm-2 pcs , 20.3x40.6cm-2 pcs , 40.6x40.6cm-4 pcs , 40.6x61.0cm-2 pcs ,thickness 3cm,(1,48 m² / set) |
The granite kerbs should be engraved into the concrete to provide lateral support, and as a rough rule of thumb, the border should extend at least half the entire width of the kerbs. Most of the pressure on the edges of each stone should come from the front, as most of the concrete in the back provides the required support, but it should be extended to ensure proper support. As a rough rule of thumb, the tows should stretch about 1 / 4 inch over the kerbs and about 2 mm below them.If you are laying any kind of driveway, path or hard surface, concrete edging stones are important to ensure that the pavement itself is enclosed so that it does not spread and the edges are protected from damage. As such, they must be laid with a strong concrete mixture around them and they are used to prevent the backing from spreading when weight is applied to them. Finished paving stones, edges and curbs are held by strong soil mixtures that are firmly anchored in the ground before they sink directly into the ground. If the steps of the design involve several walkways, a certain restraint may be required if necessary.Before laying, you may need to cut one or two granite kerbs to measure the length of the track, and even cut the miter joints to create angles. When cutting Betonedding stones with an angle grinder, measure and mark the stones at the point where you need them. You need a thick wooden board or pallet, preferably used to avoid damage to the surface of the blade when cutting through the kerb, and then chopped into the concrete edges with the grinders.