Travertine Tile Outdoor

Experience the timeless elegance and durability of our Travertine Tile Outdoor. Made from high-quality natural stone, this tile is perfect for outdoor spaces and can withstand harsh weather conditions. Enhance your outdoor design with the unique colors and textures of Travertine.

1. What is your time of making samples?

1. What is your time of making samples?
Usually we will take 1~3 days to make the samples.
2. What is your MOQ?
Usually 50 square meters.
3. What is your delivery time?
Usually 1 to 2 weeks 1x20'container after we receive the deposit.
4. Where is the shipping port?

Xiamen, Qingdao, Tianjin or Wuhan,Shenzhen port.
5. What is your payment term?
30% T/T in advance, 70% in the period of shipment. Or L/C at sight.
6. Where is the location of your company?
Located in Xiamen, Fujian province
7. What are your main products?
Marble,Granite,Travertine,Countertops,Vanity tops,Stone Basin, Tombstone,Quartz,Limestone,Sandstone,etc.

Travertine tile outdoor and granite surface layer should adopt natural travertine tile outdoor slab and granite slab. The surface of the board is required to be bright, clean and bright, with bright color, and no knife marks or swirling patterns. A bonding layer should be used under the travertine tile outdoor and granite surface. The bonding layer can be 1:4～1:6 cement sand or 1:2 cement mortar. The thickness of the cement sand bond layer is 20-30mm; the thickness of the cement mortar bond layer is 10-15mm.

Before laying the boards, they should be numbered according to the design requirements, according to the color, pattern, pattern, texture, etc. of the stone; when the boards have cracks, corners, warpages and surface defects, they should be removed, and different types of boards shall not be mixed use. When laying slabs, the vertical and horizontal alignment should be springed on the base level (mat layer or floor surface), and the alignment position is generally taken at the width of a piece of slab away from the wall.

Travertine tile outdoor and granite slabs should be soaked with water first, and can be laid after wiping or drying the surface. The laying of travertine tile outdoor and granite slabs should start from the alignment, that is, the edge of this row of slabs is aligned with the alignment.

When laying boards, pave the bonding layer on the base layer. When using cement sand bonding layer, it should be dry mixed and sprayed evenly; when using cement mortar bonding layer, dry hard cement mortar should be used. In order to enhance the bonding between the bonding layer and the board, it is advisable to apply cement slurry or dry cement spraying on the bonding layer, and then lay the board on the bonding layer in alignment with the position. The first row is laid according to the alignment, and the subsequent rows are laid according to the previous one.

The paved boards should be flat, the lines should be straight, and the inlays should be correct; the room between the boards, the board and the bonding layer, the corners, the borders and the wall should be tightly laid without gaps. The surface of the travertine tile outdoor and granite surface layer should be clean, flat and solid; the joint width of the plate should not be greater than 1mm when the design is not specified. travertine tile outdoor and granite surface layers should be protected after completion. After the cement mortar strength of the bonding layer meets the requirements, waxing can be smooth and bright. The natural travertine tile outdoor surface layer can also be broken up, that is, it can be built with broken pieces of travertine tile outdoor. It is required to use marble fragments with coordinated color and uniform thickness without sharp corners. The bonding layer should be cement mortar. The gap between the fragments should be filled with cement mortar or a mixture of cement and stone particles. The surface of the broken marble surface layer should be clean, flat and solid; the color of the broken pieces should be coordinated; the gaps between the broken pieces should be filled tightly, and the gaps should not be too large.

The allowable deviation of the height difference between two adjacent plates of the marble and granite surface layer is 0.5mm; the plate row (joint) in the surface layer is within 5m, and the allowable deviation of the straightness is 2mm; the surface flatness of the surface layer , The allowable deviation when inspecting with a 2m ruler is 1mm. The allowable deviation of the surface flatness of the broken travertine tile outdoor surface layer is 3mm.