Sandstone Paving Garden

Create a beautiful outdoor space with our Sandstone Paving Garden. The natural sandstone material adds a touch of elegance to any landscape, while the durable construction ensures long-lasting beauty. Enjoy a peaceful and inviting environment with our high-quality sandstone paving.

Miscellaneous sandstone paving garden: Sandstone that is poorly sorted and mixed with mud and sand. Generally, it contains less quartz and is mostly angular. Contains different proportions of feldspar and cuttings, often containing a small amount of mica. Feldspar is mainly plagioclase, and there are many kinds of cuttings. Abundant hetero-bases are the basic characteristics of mixed sandstone. The finer the grains, the higher the content of hetero-bases. Chlorite and hydromica are the most common miscellaneous base components. The formation conditions of sandstone are similar to feldspar sandstone or lithic sandstone, that is, formed by rapid erosion, transportation and deposition, but sandstone can be formed under different climatic conditions. Typical sandstone paving garden are often accumulated in rapidly subsiding turbidite or flysch-type construction. The sandstone tiles supplied must be placed on site. When placing the tiles, you can place them horizontally or vertically, but be careful not to damage the surface and four sides of the tiles. Rinse the dirt off the entire surface of the brick with water, wait for it to dry, and finally rinse the surface of the tile with a mixture of hydrochloric acid and water through a hose. This completely removes the dirt on the brick surface.

Construction method a. Before construction, on the concrete surface where the sandstone paving garden is piled, mix the binding soil (adhesive additives for cement) or a substance close to the binding soil with water and cement, stir, and then use a brush smear. b. Mix sand (no impurities are allowed), cement, lime and water in a ratio of 3:1:1 to form mortar. c. The mixed mortar should always be in a uniform state, and its measurement method should be unified. d. Spread the mixed mortar on the required width of the field. Even if it is dry during application, its adhesion is very strong, so do not add water frequently. e. The thickness of the mortar is at least 15mm. Apply the mortar to all the sites to be constructed. After leveling with sandstone, apply cement oil on the bonding surface of the sandstone paving garden. Then use a brush for the mixed mortar of bonding soil, cement and water. Apply on the bottom surface, try to level it as much as possible, and evenly blend and bond well.