Marble Double Vanity

This Marble Double Vanity is the perfect addition to any bathroom. Made from high-quality marble, it exudes elegance and durability. With double sinks and ample storage space, it offers convenience and functionality. Enhance your bathroom's aesthetic and functionality with this must-have piece.

Marble double vanity digging and drilling means to make marble double vanity holes, tap holes, positioning holes, paper towel holes, facial towel holes, etc. on the marble double vanity. The hole is usually opened by a machine, and the basin hole is usually opened manually, or the four corners of the bathroom vanity 37 x 22 are first opened by a hole drilling machine and then manually cut. General process: first use a cutting machine to open the pot on the back of the marble slab vanity, cut about half the thickness, without opening and threading, then turn the black marble top vanity over, and then use the size sheet to mark the location of the pot on the front with correction fluid and a red pen. And the size and the opening position of the faucet, and then manually use the cutting machine to open the 48 cultured marble vanity top. The tap hole is drilled on the front and the positioning hole is drilled on the back. The depth of the hole is generally less than 1cm. Usually, if the 36 vanity with marble top hole of the double sink vanity white marble top is only 7 or 8cm away from the side, especially the fragile custom marble vanity, it needs to be reinforced (carrara top, contains resin, and has good toughness, so it does not need to add steel). Even if this distance is exceeded, the steel bars must be reinforced on the back if required by the customer. Generally, the diameter of the steel bars added is 6/8/10mm, the length is 48 inches, 36 inches, and 24 inches, and the groove depth of the buried steel bars is about 10 mm.