Marble Canada

Introducing Marble Canada, a luxurious and timeless addition to any space. Made from the highest quality marble, this product offers a stunning and elegant aesthetic. With its durability and unique veining, Marble Canada is the perfect choice for those seeking a sophisticated and enduring material.

 

Feature	Details
Materia	White Marble Canada
Products	Tiles, slabs, stairs, countertop, wall cladding, paving stone, kerbstone, vanity-top, etc
Thickness	16mm,20mm,and 30mm.
Surface Finishing	Polished, Honed
Size For Reference	12”x12”,12”x24”,16”x16”,18”x18”,24”x24”,etc
Customized size is available.	305x305mm, 305x610mm, 400x400mm, 457x457mm, 600x600mm,etc
Small slabs	60-90x180-300x2/3cm
Big slabs	120upx240upx2/3xcm
Stairs	Step:110-150x33x2/3cm
Riser	110-150x15x2/3cm
Countertops	24"x96", 26"x96", 28"x96", 28"x108", etc.

 

1. Clean the site:

Thoroughly clean the work surface with a dust pusher and vacuum cleaner.

2. Tailor processing:

The purpose is to solve the problem of marble canada edge pollution on both sides of the stone gap and avoid the black edge problem of the marble canada gap; it can also solve the problem of uneven gap caused by the stone processing size or paving. This standard: the seam should be straight, the seam should be thin, and the stone slab surface should not be broken. The thickness of the cutting sheet is 0.2 as the standard.

3. Partial grinding and leveling:

For the places where the notch is particularly high, first use a metal steel bowl to make it slightly flat. (It must be sharpened on the other side, and the other side must be sharpened as wide as possible to avoid the grinding disc falling off due to the high notch when grinding with a large machine in the subsequent process. .)

4. Clear seam treatment:

Use a vacuum cleaner or a brush to clean the seam, and if necessary, scrape the seam with a blade to ensure that there are no black edges after grinding.

5. Seam anti-fouling treatment:

Apply different antifouling agents according to the quality of the stone (jade and light-colored stone are essential, otherwise there will be a black shadow after the crystal surface is completed), so as to prevent the glue from seeping into the stone before the glue is dried and cured.

6. Seamless processing:

Also known as caulking or repair glue. This process has to fill up fullness: with a bulge as a criterion. Otherwise, the colloid will shrink after curing, and there will be half seams after sanding.

7. Primary grinding treatment (No. 30-50):

Use 12 professional stone leveling machines to smooth the notches, unevenness and scratches caused by the construction due to factors such as deformation, paving, processing, etc. Processes such as hole repair and fine grinding create conditions.

8. Clean the marble canada surface (this process is only used if heat-curing repair or light-curing repair is required):

Use a professional machine with a stone pore cleaning brush (wire brush) to clean the dirt on the damaged or broken stone to ensure that the repair glue is fully adhered to the stone in the subsequent process. This part is very important: if it is not cleaned with a wire brush, the dirt on the damaged marble canada cannot be cleaned, which will naturally affect the adhesion between the repair glue and the stone, which will cause the skin to fall off, which will reduce the repair quality.

9. Repair and deal with holes, burst edges and damages.