Xiamen Ji Yuan Stone Co.,Ltd.
Alpinus White Granite Countertops
Alpinus White Granite Countertops
Upgrade your kitchen with Alpinus White Granite Countertops. Made with premium quality granite, these countertops offer durability and elegance. With its sleek white finish, these countertops will elevate the overall look of your kitchen. Enjoy the benefits of a beautiful, long-lasting countertop that will impress your guests.
| Feature | Details |
|---|---|
| Slabs Size |
|
| Thickness | 15mm, 18mm, 20mm, 25mm, 30mm, etc |
| Tiles Size |
|
| Thickness | 10mm,12mm,15mm,18mm, 30mm, etc |
| Countertops Size | 96" x 26", 76" x 36", 98” x 26", 108" x 26" |
| Thickness | 3/4", 3/8", 1/2” |
| Vanity Tops Size | 25"x22", 31"x22", 37”x22", 49”x22”, 60”x22” |
| Thickness | 3/4", 3/8", 1/2” |
| Color | White,Black |
| Material | Granite |
| Product | Alpinus granite counters |
| Finished Products | Floor Tiles, Wall Cladding, Countertops, Windowsills, Special-Shaped Tiles, Small Slabs, Swimming Pool Coping, Stairs, Steps, Wall Panel Paver, Flooring, Veneers, Slabs, Coping Tiles, Bathtub etc. |
After the alpinus white granite countertops is backed up, a secondary bonding process is required. If there is no 1mm left of the stone after the back, the two bonded boards will collapse when they touch each other during the secondary processing. After bonding, the glue gap of the product is large, and it is not easy to repair, because the contact area of the collapsed edge is Small, it is difficult to repair, and the repaired glue is very likely to fall off after a long time.
In many projects decorated with alpinus white granite countertops, it is often seen that the quality of the glue at the joints of some products bonded by external corners is poor, and the glue at the glued parts falls off, which is mostly caused by this problem. If the glued handwashing table in Figure 3 does not leave 1mm when it is backwards, it will be more likely to collapse when glued. Do not leave 1mm behind the product, and the sharp edges are easy to collapse when the product is transported for a long time due to the mutual extrusion between the plates and the impact. After leaving 1mm, it can reduce the damage of product transshipment and long-distance transportation, and improve the safety of the product.
In Figure 4, it can be seen that the product with 1mm left on the back is easy to collapse if the upper and lower sides are processed backwards and no special protection measures are taken for the downward side. This measure includes leaving a 1mm step on the back and wrapping the protective measures with pearl cotton or back leather. In Figure 4, the backside is protected with backskin to prevent the backside from being chipped. Picture of alpinus white granite countertops after installation on site of an important construction project in Xi'an. In picture 5, it can be seen that there is a 1mm step left on the board after it is backed up. After installation, a small right angle is formed between the two boards. The two boards are not close to each other. The quality is very good. The lower part of the installed product is also protected by a 90° angle cardboard board, which shows that the outer corner is easily damaged.
Share
